RADIO ISLAM Decoder Settings
Effective as of 30 July 2015

If you do not get Radio Islam after connecting it to the Satellite Dish, you may have to tune the Decoder with a TV just for the first time.

NEW RADIO ISLAM BLACK DECODER Model MW 1548 with USB

1. Press the menu button on the Radio Islam remote (Edit channel will appear)

2. Press the down arrow button and then move down to Installation

3. Press the right arrow button and move down to TP LIST and then press OK

4. Scroll up to Number 27 = frequency 12722 / 26650

5. Notice signal strength will turn blue +-90% and signal quality will turn green in colour +- 70%
If correct go to step 12

6. If signal quality is Grey and Quality is LOW +- 5% then:

7. Press (F2) Green button on remote

8. Change frequency from 3000 to 12723

9. Go down to symbol rate and change from 100KS/s to 26650

10. Go down to polarity and change from H to V

11. Go down to save and press OK

Notice signal strength and quality will change colour – if not call installer for dish.

12. Now press F4 (blue button) on remote = search

13. Go up to FTA only and press Right arrow button and change to YES

14. Go down to scan channel and press Left arrow button to Radio. Network search = NO

15. Go down to OK & press OK

16. Search and YES – press OK – wait until scan is complete

17. Press exit button 3 (three) times to get back to main screen.

18. Press the menu button on remote and move up to edit Channel*

19. Press the right arrow button to move to Radio list then press OK

20. Look for Radio Islam 35K and press the OK button on it.

21. Now press F3 (Yellow) button on remote then press OK again – you will notice a double arrow on the right hand side of Radio Islam – 35K appearing.

22. Now move to position number 1 then press (F3) yellow button on remote* a message will appear “are you sure to save?” select YES then press OK

23. Now press exit button 3 (three) to exit setup and return to normal.

24. Contact Zunaid Khan if there are any further problems 084 304 0795

MODEL NUMBER: S6100SC & MW1548 - S5E52 (remote only decoder - not slimline)

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Now use the Radio Islam Remote ONLY
  3. Press Menu - go to User Installation
  4. Select Channel Search and press OK
  5. Scroll down to Transponder
  6. The Transponder must be TP48, if not, then press the right arrow button until TP48 appears.
  7. Now press the Red Audio Button on your remote.
  8. Scroll down to Frequency and enter 12722. If this does not work then try 12623.
  9. Now go to SYMBOL RATE
  10. Change the SYMBOL RATE to 26650
  11. You will notice a yellow bar on the right hand side signal strength and quality
  12. If this is not yellow, then check if your ANTENNA (at the back of the decoder) is plugged into LNB IN (not LNB OUT)
  13. Now go to SEARCH 1 SAT FTA $
  14. Now press the left arrow button three (3) times
  15. The display must show SEARCH TP FTA (must not show SEARCH TP FTA $)
  16. Press OK for scanning
  17. After the scanning is completed, the word VIEW will appear. Select VIEW
  18. Now a message 'Please wait for saving data' will appear
  19. A TV channel will be displayed on your TV screen
  20. Now press TV / RADIO button which is situated directly beneath the number 7 button
  21. You will see 'Islam' - Press your PR- button on your remote and look for RIslam_33k
  22. To move Radio Islam to position number 1 press MENU, go to channel manager, select Radio Channel, and press OK
  23. Your TV display will show RADIO CHANNELS
  24. Go to RIslam_33k and press the Yellow button on the remote. The word MOVE will appear. Then press OK
  25. An arrow will appear next to RIslam_33k. Now press the down arrow button and scroll to position number 1 and press OK
  26. Press the EXIT button twice
  27. Contact Zunaid Khan if there are any further problems 084 304 0795

 

MODEL NUMBER: S5E52 SLIMLINE DECODER

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Press menu on the Radio Islam Remote.
  3. On the top-left of the Menu Bar the word 'CHANNEL' will appear - If the word 'CHANNEL' does NOT appear, then press the right/left arrow button untill the word 'CHANNEL' appears.
  4. The following will show:
    * TV Channel
    * Radio Channel
    * Add Channel
  5. Scroll down to 'ADD CHANNEL' and press OK on Radio Islam Remote.
  6. Go down to FREQUENCYand enter 12722. If this does not work then try 12623 and press OK.
  7. Now go down to SYMBOL RATE and type-in 26650 and press OK.
  8. Scroll down to the word SEARCH and press the right arrow button until the word RADIO appears. ( * Notice the bar in 'SIGNAL QUALITY' will change green in colour.) Now press OK... search will start...
  9. When search is over press OK.
  10. Now press the exit button once only.
  11. Scroll up to 'RADIO CHANNEL' and press OK.
  12. Scroll UP / DOWN and look for RIslam_33k. (* Note: RIslam_33k on number 1 will NOT work because that was the old settings.)
  13. Move Radio Islam to number 1 by pressing button number 2 (Pin Code 0000) and using the UP / DOWN arrow button to reach number 1, and press button number 2 again.
  14. Press EXIT on remote and select ok to SAVE
  15. Press EXIT twice to return to normal
  16. Contact Zunaid Khan if there are any further problems 084 304 0795.

MODEL NUMBER: R1548 - STRONG SR 3000 DECODER

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Press menu on the Radio Islam Remote.
  3. On the top-left of the Menu Bar the word 'CHANNEL' will appear - If the word 'CHANNEL' does NOT appear, then press the right/left arrow button untill the word 'CHANNEL' appears.
  4. The following will show:
    * TV Channel
    * Radio Channel
    * Add Channel
  5. Scroll down to 'ADD CHANNEL' and press OK on Radio Islam Remote.
  6. Go down to FREQUENCYand enter 12722. If this does not work then try 12623 and press OK.
  7. Now go down to SYMBOL RATE and type-in 26650 and press OK.
  8. Scroll down to the word SEARCH and press the right arrow button until the word RADIO appears. ( * Notice the bar in 'SIGNAL QUALITY' will change green in colour.) Now press OK... search will start...
  9. When search is over press OK.
  10. Now press the exit button once only.
  11. Scroll up to 'RADIO CHANNEL' and press OK.
  12. Scroll UP / DOWN and look for RIslam_33k. (* Note: RIslam_33k on number 1 will NOT work because that was the old settings.)
  13. Move Radio Islam to number 1 by pressing button number 2 (Pin Code 0000) and using the UP / DOWN arrow button to reach number 1, and press button number 2 again.
  14. Press EXIT on remote and select ok to SAVE
  15. Press EXIT twice to return to normal
  16. Contact Zunaid Khan if there are any further problems 084 304 0795.