OTHER MAKES OF DECODERS
HOW TO TUNE!!!!

Effective as at 30 July 2015

  1. Vivid Decoder
  2. GOD Decoder
  3. Modek
  4. Modek 777
  5. Modek 888
  6. Modek silver series 999
  7. Strong 4310
  8. Strong SR3000
  9. Strong SRT 4310
  10. Motosat
  11. Radix
  12. Wiztech - Model 220
  13. Wiztech - Model 260
  14. Skybox
  15. Delsat - DSR5500
  16. Infinity Model SP100
  17. Digi Plaza Manhattan
  18. Deltech - 2010
  19. Fortec Star - FS 4400
  20. Samsung DSR - 777
  21. Elsat - FR 71
  22. Modek ZBR 786
  23. Space SBR 100

 


Vivid Decoder

  1. Press menu button on Vivid remote
  2. Go down to installation and press OK button
  3. Enter pin code: 1379 and press OK
  4. Go down to signal set up and press OK
  5. Go to signal number 3 and press OK
  6. Make sure Signal 3 is enabled
  7. Go down to frequency if there is a frequency, then press the right arrow button to clear
  8. Change the frequency to 12722. If this does not work then try 12623.
  9. Go down to symbol rate – if there is a number then press right arrow button to clear
  10. Enter 26650 at symbol rate
  11. Polarization must be vertical
  12. FEC must be 7/8 press OK
  13. Notice Signal intensity will be between normal to good
  14. Press the exit button
  15. Go down to tune DSD press OK
  16. Press Music button on remote and look for Radio Islam_35k
  17. Contact Zunaid Khan if there are any further problems 084 304 0795

 


GOD Decoder

  1. Press menu button of the GOD remote
  2. Go to TP settings/ press right arrow button until TP setting appear
  3. Press OK on ADD TP
  4. Change TP frequency to 12722. If this does not work then try 12623.
  5. Change symbol rate to 26650
  6. Polarization must be vertical
  7. Press OK to scan
  8. Press OK again to store
  9. Press Exit button twice
  10. Press Radio TV button to access Radio Islam_35k
  11. Contact Zunaid Khan if there are any further problems 084 304 0795

 


Modek

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Now use the Radio Islam Remote ONLY
  3. Press Menu - go to User Installation
  4. Select Channel Search and press OK
  5. Now press the red Audio Button on your remote
  6. The Transponder must be TP48, if not, then press the right arrow button until TP48 appears.
  7. Press the RED audio button on the remote and change the frequency to 12722. If this does not work then try 12623.
  8. Now go to SYMBOL RATE
  9. Change the SYMBOL RATE to 26650
  10. You will notice a yellow bar on the right hand side signal strength and quality
  11. If this is not yellow, then check if your ANTENNA (at the back of the decoder) is plugged into LNB IN (not LNB OUT)
  12. Now go to SEARCH 1 SAT FTA $
  13. Now press the left arrow button three (3) times
  14. The display must show SEARCH TP FTA (must not show SEARCH TP FTA $)
  15. Press OK for scanning
  16. After the scanning is completed, the word VIEW will appear. Select VIEW
  17. Now a message 'Please wait for saving data' will appear
  18. A TV channel will be displayed on your TV screen
  19. Now press TV/RADIO button which is situated directly beneath the number 7 button
  20. Look for Radio Islam 35k.
  21. Contact Zunaid Khan if there are any further problems 084 304 0795

 


Modek - 777

  1. Press menu button of the Modek remote
  2. Go to TP settings/ press right arrow button until TP setting appear
  3. Press OK on ADD TP
  4. Satelite name must be NSS6
  5. Scan mode must be FREE or FREE/ RADIO/ TV
  6. Change the frequency to 12722. If this does not work then try 12623.
  7. Change symbol rate to 26650
  8. Polarization must be vertical
  9. Press OK to scan
  10. Press OK again to store
  11. Press Exit button twice
  12. Press Radio TV button to access Radio Islam_35k
  13. Contact Zunaid Khan if there are any further problems 084 304 0795

Modek 888

  1. Press menu button of the Modek remote
  2. Go to TP settings/ press right arrow button until TP setting appear
  3. Press OK on ADD TP
  4. Change TP frequency to 12722. If this does not work then try 12623
  5. Change symbol rate to 26650
  6. Polarization must be vertical
  7. Press OK to scan
  8. Press OK again to store
  9. Press Exit button twice
  10. Press Radio TV button to access Radio Islam_35k
  11. Contact Zunaid Khan if there are any further problems 084 304 0795

Modek Silver Series - 999

  1. Press menu button of the Modek remote
  2. Go to TP settings/ press right arrow button until TP setting appear
  3. Press OK on ADD TP
  4. Satelite name must be IS 7/10KU
  5. Scan mode must be FREE or FREE/ RADIO/ TV
  6. Change the frequency to 12722. If this does not work then try 12623.
  7. Change symbol rate to 26650
  8. Polarization must be vertical
  9. Press OK to scan
  10. Press OK again to store
  11. Press Exit button twice
  12. Press Radio TV button to access Radio Islam_35k
  13. Contact Zunaid Khan if there are any further problems 084 304 0795

Modek Model: ZBR 786

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Now use the Modek remote ONLY
  3. Press Menu - go to User Installation
  4. Select Channel Search and press OK
  5. Scroll down to Transponder
  6. The Transponder must be TP48, if not, then press the right arrow button until TP48 appears.
  7. Now press the Red Audio Button on your remote.
  8. Scroll down to Frequency and enter 12722. If this does not work then try 12623.
  9. Now go to SYMBOL RATE
  10. Change the SYMBOL RATE to 26650
  11. You will notice a yellow bar on the right hand side signal strength and quality
  12. If this is not yellow, then check if your ANTENNA (at the back of the decoder) is plugged into LNB IN (not LNB OUT)
  13. Now go to SEARCH 1 SAT FTA $
  14. Now press the left arrow button three (3) times
  15. The display must show SEARCH TP FTA (must not show SEARCH TP FTA $)
  16. Press OK for scanning
  17. After the scanning is completed, the word VIEW will appear. Select VIEW
  18. Now a message 'Please wait for saving data' will appear
  19. A TV channel will be displayed on your TV screen
  20. Now press TV / RADIO button which is situated directly beneath the number 7 button
  21. You will see 'Islam' - Press your PR- button on your remote and look for RIslam_33k
  22. To move Radio Islam to position number 1 press MENU, go to channel manager, select Radio Channel, and press OK
  23. Your TV display will show RADIO CHANNELS
  24. Go to RIslam_33k and press the Yellow button on the remote. The word MOVE will appear. Then press OK
  25. An arrow will appear next to RIslam_33k. Now press the down arrow button and scroll to position number 1 and press OK
  26. Press the EXIT button twice
  27. Contact Zunaid Khan if there are any further problems 084 304 0795

Strong - 4310

  1. Press menu button on the Strong remote
  2. Press right arrow button until installation appears
  3. Press down arrow button until you reach transponder list and then press OK
  4. Go down to edit transponder and press OK
  5. Change the frequency to 12722. If this does not work then try 12623.
  6. Press the yellow button on the remote to edit.
  7. Go down to symbol rate and enter 26650
  8. Polarity must be vertical
  9. Go to save and press OK
  10. Press the red button on the remote to scan.
  11. Scan mode: press the right arrow button to change to FTA then press OK
  12. Press OK to save
  13. Press exit 3 times then press TV radio button on remote to go to Radio channels
  14. If you want to move Radio Islam_35k to number 1 then press the menu button and go to channel manager.
  15. Go down to move channel
  16. Press the yellow button on  the remote then move to will displayed.
  17. Press number 1 on remote and OK and then exit 3 times
  18. Contact Zunaid Khan if there are any further problems 084 304 0795

Strong SR3000

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Press menu on your Strong Remote.
  3. On the top-left of the Menu Bar the word 'CHANNEL' will appear - If the word 'CHANNEL' does NOT appear, then press the right/left arrow button untill the word 'CHANNEL' appears.
  4. The following will show:
    * TV Channel
    * Radio Channel
    * Add Channel
  5. Scroll down to 'ADD CHANNEL' and press OK on your Strong Remote.
  6. Change the frequency to 12722. If this does not work then try 12623.
  7. Now go down to SYMBOL RATE and type-in 26650 and press OK.
  8. Scroll down to the word SEARCH and press the right arrow button until the word RADIO appears. ( * Notice the bar in 'SIGNAL QUALITY' will change green in colour.) Now press OK... search will start...
  9. When search is over press OK.
  10. Now press the exit button once only.
  11. Scroll up to 'RADIO CHANNEL' and press OK.
  12. Scroll UP / DOWN and look for Radio Islam_35k. (* Note: RIslam_33k on number 1 will NOT work because that was the old settings.)
  13. Move Radio Islam to number 1 by pressing button number 2 (Pin Code 0000) and using the UP / DOWN arrow button to reach number 1, and press button number 2 again.
  14. Press EXIT on remote and select OK to SAVE
  15. Press EXIT twice to return to normal
  16. Contact Zunaid Khan if there are any further problems 084 304 0795.



    STRONG Model SRT4310

    After Setting up your STRONG Decoder on your TV/Monitor,

    Only use your STRONG Remote to do the following Procedure

    1. Press the Menu button on your Remote
    2. Press the Right or Left Arrow button until you see INSTALLATION
    3. Go down to Transponder List and Press the OK Button
    4. Go to Add Transponder and then Press the OK Button
    5. Go to channel 27 and see " Q" AND " L " in the bottom of your screen.
    6. "Q" should be Yellow in colour
    7. and " L " should be red in colour. " L " should be +- 80%, If not go down to step e

    a. if it is, then Press the Red "SAT" button on your remote, "Scan mode"
    b. will appear, then press the right arrow button until FTA appears and then
    c. Press the OK button. Now go to Step Number 8
    d. If it there is no signal on "Q" and "L", then
    e. Press the Yellow Button on your remote to Add a Frequency
    change the Frequency to – 12623 and the
    Symbol Rate to – 26650
    Polarity must be – V (Not H)

    f. Go down to the word Save and press the OK Button

    Go to the New Frequency and press the red SAT button on your remote
    "Scan Mode" will appear

    Press the right arrow button until FTA appears then press the OK button

    8. Press OK button on Save
    9. Now Press the Exit button 4 times
    10. Press the TV/Radio Blue Button on your remote
    11. Go to radio channels
    12. Press the Menu button. Now press the Right Arrow button till you see
    13. " Channel Manager " then press the Down Arrow button to move the Channel and press OK
    14. Look for Radio Islam 35k then press the Yellow button on your remote and move it to number 1 by pressing button number 1 on your Remote
    15. Press the Exit button 4 time
    16. Contact Zunaid Khan if there are any further problems 084 304 0795


Motosat

  1. Connect the decoder to a TV unit and use the TV remote to select the AV Channel until you find the Radio Islam Picture.
  2. Press menu on the Radio Islam Remote
  3. Look for AUTO SCAN - If you do not see AUTO SCAN on the list, then press the right arrow button until you see the list with AUTO SCAN
  4. Select AUTO SCAN
  5. Go to FREE TO AIR and press the right arrow button until the word RADIO appears
  6. Press ok
  7. The decoder will start searching. After the search completes, press the EXIT Button on your remote twice
  8. Press the menu button again and go to Radio Channel List. If this does not appear, then press the left arrow button. Select Radio Channel List
  9. You will notice that number 1 will show NO SIGNAL (written ISLAM)
  10. Now scroll down to Radio Islam_35k
  11. Move Radio Islam to number 1 by pressing button number 2 (Pin Code 0000) and using the UP/DOWN arrow button to reach number 1, and press button number 2 again.
  12. Press EXIT on remote and select ok to SAVE
  13. Press EXIT twice to return to normal
  14. Contact Zunaid Khan if there are any further problems 084 304 0795

Radix DT 100

  1. Press the menu button on the Radix remote
  2. Go down to channel manager and press OK
  3. Go down to transponder editor and press OK
  4. Press OK on PAS7
  5. Change the frequency to 12722. If this does not work then try 12623.
  6. Change transponder to 26650
  7. Press exit button to save
  8. Press menu button again and go down to channel manager then press OK
  9. Go down to manual search and press OK
  10. Go down to next and press OK
  11. Go down to start search
  12. Press OK
  13. Press the exit button twice then press Radio TV button then look for Radio Islam_35k
  14. Contact Zunaid Khan if there are any further problems 084 304 0795

Wiztech - 220

  1. Press the menu button on the Wiztec remote
  2. At installation press OK button on remote
  3. Go down to manual search and press OK
  4. Go to TP
  5. Change the frequency to 12722. If this does not work then try 12623.
  6. Go down to symbol rate S/R PRESS 26650
  7. Make sure polarization is vertical
  8. Search range is = to all/ free to air (FTA)
  9. Search option = FAST press OK
  10. Now press the red button on remote and OK to store
  11. Wait till scan is alright then press OK
  12. To move Radio Islam press menu and go to channels editing
  13. Press button number 3 on remote on Radio Islam_35k and go down to position one by using the up and down arrow buttons then press OK
  14. Contact Zunaid Khan if there are any further problems 084 304 0795

Wiztech - 260 FTA

  1. Press the menu button on the wiztec remote
  2. Go to installation and press OK
  3. Go to channel search and enter pin code 0000 and press OK
  4. Go to multi search press OK
  5. Change the frequency to 12722. If this does not work then try 12623
  6. Go to symbol rate and enter 26650
  7. Press exit button select OK to save
  8. Press exit button twice
  9. Press TV radio button on remote then go to Radio Islam_35k
  10. To move RIslam_33k press the menu button then go to installation move down to channel manager and press OK
  11. Go to channel edit
  12. Press the red button on Radio Islam_35k
  13. Press the up/down arrow button to move to position number 1 and then press OK
  14. Press the exit button message to save will appear select OK
  15. Contact Zunaid Khan if there are any further problems 084 304 0795

Skybox

  1. Press the menu button on the skybox remote
  2. Go down to TP list by pressing right arrow button and then press OK
  3. Change the frequency to 12722. If this does not work then try 12623
  4. Press the Red button to edit
  5. Go down to symbol rate and enter the number 26650
  6. Make sure polarity is vertical
  7. Go down to save
  8. Press the blue button on the remote to search
  9. Notice options: select yes on FTA (press OK to search)
  10. Scan channel TV plus radio
  11. Network search = no
  12. Press exit button 3 times
  13. Press the TV radio button on the remote and look for RIslam_33k
  14. To move RIslam_33k to number 1 – press the menu button then go to edit channel and then go to Radio Channel list and press OK
  15. Press  the yellow button on the remote and press OK
  16. Use the up/down arrow button to move to position number one then press OK
  17. Press the exit button 3 times and press OK to save
  18. Press Radio TV button and look for Radio Islam_35k
  19. Contact Zunaid Khan if there are any further problems 084 304 0795

Delsat - DSR5500

  1. Press the menu button on the Delsat remote
  2. Go to installation and press OK
  3. Go down to manual search and press OK
  4. Use PAS7/10/KU 68.5 E
  5. Now press recall button on remote to go to transpoder list
  6. Change the frequency to 12722. If this does not work then try 12623
  7. Now press the green button on the remote to edit
  8. Change the symbol rate to 26650
  9. Go to OK or press the blue button to scan and press OK
  10. Press the exit button 3 times
  11. Select radio TV button on remote and look for Radio Islam_35k
  12. To move Radio Islam_35k – press menu then go to channel manager
  13. Go to edit channels
  14. Press the green button to move Radio Islam_35k and press OK
  15. Move down to position number 1 then press the red button then exit.
  16. Contact Zunaid Khan if there are any further problems 084 304 0795

Infinity - SP100

  1. Press the menu button on the remote
  2. Go to installation
  3. Go to down to TP manager and press Ok
  4. Go down to edit transponder and then press OK
  5. Change the frequency to 12722. If this does not work then try 12623
  6. Now press the yellow button to edit
  7. Go down to symbol rate and press 26650
  8. Make sure polarization is vertical
  9. Go to save and press OK
  10. You will notice scan mode: all/press the right arrow to change to FTA then press OK to scan
  11. After scan is completed press the OK button to save
  12. Press the exit button 4 times
  13. Press TV Radio button and go to Radio Islam_35k
  14. Contact Zunaid Khan if there are any further problems 084 304 0795

Digi Plaza

  1. Press set up button on remote
  2. Go down to channel search and press OK
  3. Change the frequency to 12722. If this does not work then try 12623
  4. Polarization must be vertical
  5. Change symbol rate to 26650
  6. Go down to start search and press OK
  7. Press Ok on store
  8. Press exit button 3 times
  9. Press Radio TV button to go to Radio Islam_35k
  10. To move Radio Islam_35k to channel 1 press setup
  11. Go down to edit channel list and then press Ok
  12. Press select on Radio Islam_35k use up/down arrow button to move to position 1 then press select again to place in position
  13. Go down to store to save data
  14. Press Exit 3 times
  15. Contact Zunaid Khan if there are any further problems 084 304 0795

Deltec 2010

  1. press menu button on remote
  2. Go to installation by pressing right arrow
  3. Go down to TP List - enter pin code 0000
  4. Change the frequency to 12722. If this does not work then try 12623
  5. Press red button on remote to edit
  6. Go down to symbol rate and change to 26650
  7. Polarity must be vertical
  8. Go to save
  9. Press blue button n remote to search
  10. Make sure FTA  is selected and then press OK
  11. Press exit 3 times
  12. Press TV radio button
  13. Look for Radio Islam_35k
  14. To move Radio Islam_35k to position 1 press menu, right arrow button until you reach edit channel
  15. Enter pin code 0000
  16. Go down to Radio Channel
  17. Press yellow button on remote  and press OK
  18. Use the up/down button to move to position – number 1 and then press OK
  19. Press exit to save
  20. Select yes
  21. Press exit 3 times
  22. Contact Zunaid Khan if there are any further problems 084 304 0795

Fortec Star - FB 4400 (Lifetime Ultra cannot be tuned)

  1. Press menu button on remote
  2. Go to installation by pressing right arrow
  3. Go down to TP List – enter pin code 0000
  4. Change the frequency to 12722. If this does not work then try 12623
  5. Press red button on remote to edit
  6. Go down to symbol rate and change to 26650
  7. Polarity must be vertical
  8. Go to save
  9. Press blue button n remote to search
  10. Make sure FTA  is selected and then press OK
  11. Press exit 3 times
  12. Press TV radio button
  13. Look for Radio Islam_35k
  14. To move Radio Islam_35k to position 1 press menu, right arrow button until you reach edit channel
  15. Enter pin code 0000
  16. Go down to Radio Channel
  17. Press yellow button on remote  and press OK
  18. Use the up/down button to move to position – number 1 and then press OK
  19. Press exit to save
  20. Select yes
  21. Press exit 3 times
  22. Contact Zunaid Khan if there are any further problems 084 304 0795

Samsung DSR 777

  1. Press menu button on remote and go to TP setting by pressing right arrow buttons
  2. Press OK
  3. Go  down to add TP
  4. Change the frequency to 12722. If this does not work then try 12623
  5. Change symbol rate to 26650
  6. Press OK to save
  7. Press menu go to TP settings and then go to auto search
  8. SATEL=PAS7/10KU
  9. Select FTA
  10. Press OK
  11. Press the EXIT button twice
  12. Press the TV/RADIO button on the remote
  13. Look for Radio Islam_35k
  14. Contact Zunaid Khan if there are any further problems 084 304 0795

ELSAT - FR 71

1. Press the menu button on the Radio Islam remote (Edit channel will appear)

2. Press the down arrow button and then move down to Installation

3. Press the right arrow button and move down to TP LIST and then press OK

4. Scroll up to Number 27 = frequency 12722 / 26650

5. Notice signal strength will turn blue +-90% and signal quality will turn green in colour +- 70%
If correct go to step 12

6. If signal quality is Grey and Quality is LOW +- 5% then:

7. Press (F2) Green button on remote

8. Change frequency from 3000 to 12723

9. Go down to symbol rate and change from 100KS/s to 26650

10. Go down to polarity and change from H to V

11. Go down to save and press OK

Notice signal strength and quality will change colour – if not call installer for dish.

12. Now press F4 (blue button) on remote = search

13. Go up to FTA only and press Right arrow button and change to YES

14. Go down to scan channel and press Left arrow button to Radio. Network search = NO

15. Go down to OK & press OK

16. Search and YES – press OK – wait until scan is complete

17. Press exit button 3 (three) times to get back to main screen.

18. Press the menu button on remote and move up to edit Channel*

19. Press the right arrow button to move to Radio list then press OK

20. Look for Radio Islam 35K and press the OK button on it.

21. Now press F3 (Yellow) button on remote then press OK again – you will notice a double arrow on the right hand side of Radio Islam – 35K appearing.

22. Now move to position number 1 then press (F3) yellow button on remote* a message will appear “are you sure to save?” select YES then press OK

23. Now press exit button 3 (three) to exit setup and return to normal.

24. Contact Zunaid Khan if there are any further problems 084 304 0795


Space SBR 100

  1. Press menu button of the Modek remote
  2. Go to TP settings/ press right arrow button until TP setting appear
  3. Press OK on ADD TP
  4. Satelite name must be IS 7/10KU
  5. Scan mode must be FREE or FREE/ RADIO/ TV
  6. Change the frequency to 12722. If this does not work then try 12623.
  7. Change symbol rate to 26650
  8. Polarization must be vertical
  9. Press OK to scan
  10. Press OK again to store
  11. Press Exit button twice
  12. Press Radio TV button to access Radio Islam_35k
  13. Contact Zunaid Khan if there are any further problems 084 304 0795